Spare Tire Carrier

• For Tires 33 To 40 Inches
• Rotating Turret Brackets For Rear Of Bed
• Single Fixed Mount And Backing Plate For Front

See All

• 5 Year Finish Warranty
• For Tires 30 To 40 Inches
• Heavy Duty Ratchet Strap
• Lifetime Craftsmanship Warranty
• Welded All 1 Piece Construction

See All

• Built To Carry Heavier Tires Up To 37 in.
• Pivots On 1.5 in. Solid Steel Shaft Pin
• Shaft Is Welded Not Bolted
• Structural T-Joint Welds
• Polyurethane Pad Reduces Rattling

See All

• Rack Size 28 in. X 11.5 in.
• Stud Size 12mm x 1.5
• Mounts To Tube Cage
• Mounts High On The Cage For Increased Visibility And Cargo Space
• Allows Up To 30 in Tire
• Includes 4 Lug Nuts And Tube Clamps
• Durable Black Powder Coat Finish

See All

• Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
• Bumper Meets Rear Flares To Create Convenient Step
• Rear Parking Blind Spot Sensor Compatible
• Maintains Factory Receiver
• Provision To Relocate Backup Camera

See All

• Body Width-Multi-Faceted Design For High Clearance/Maximum Departure Angle In A Full-Featured Bumper
• Integrated High Clearance Class III Tow Hitch Receiver/Mounting Provisions For Backup Sensors
• 1 in. Thick Extreme Duty Recovery Shackle Tabs Are Angled For High Clearance/ Welded Inside/ Out
• Works w/ Stock Spare Tire Mount Or Paramounts Gen 3 Heavy Duty Tire/Accessory Carrier
• 4 mm Thick Steel Plate Construction- CNC Laser Cut And Precision Brake-Formed
• Multi-Stage Fine-Texture Black Powder Coat Finish For Long Lasting Great Looks/Corrosion Resistance

See All

• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings - Welds On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty - Limited Lifetime Warranty

See All

• Off The Door Tire Carrier

See All

• Direct Fit
• Strong Monocoque Aluminum Construction
• Eliminates Tailgate Sag
• Maximum tire size – 37”
• Increase load carrying capacity to 135lbs
• Mounting brackets are made from Forged Chrome materials – 30% stronger than steel
• Adjustable Tire Mount
• 3rd Brake light mount included
• Protective EPDM Gaskets Included To protect Factory Finish
• Mounting points for optional brackets to mount trail Jack.
• Maintains the easy single action of opening and closing of the tailgate
• No drilling required.

See All

• RRC Spare Tire Carrier

See All

• Retains Single Action Opening And Closing Of Tailgate
• Constructed Out Of Strong Cast Aluminum
• Reinforced Design Prevents Potential Damage To The Body
• Protective Gaskets Included To Protect Finish
• Mounts Up To 37 in. Tire
• 3rd Brake Light Mount Included
• Works w/Aftermarket And O.E. Bumpers
• No Drilling Required
• Durable 2-Stage Light Textured Black Powder Coat Finish
• 3 Year Finish/Limited Lifetime Warranty

See All

• Will Handle Up To 40 in. Tires
• Accommodates 4 Different Bolt Patterns
• Pivot Secured In Double Sheer
• In House Over Center Latch
• Designed For Even Weight Distribution

See All

• Allows For Use Of Up To A 40 in. Tire
• Adjustable Mount To Account For Tire Size And Wheel Offset
• Rubber Gaskets Keep Bed Free From Scrapes Or Scuffs
• Durable Steel Construction
• Powder Coated Black For Corrosion Resistance

See All

• Allows For Up To a 35 in. Tire
• Tire Mounts 2 in. Further Away For m The Body
• 1/4 in. Steel Construction
• Limited 5 Year Warranty

See All

• Allows Positioning Of Spare Tire Anywhere In Bed

See All

• HD Tire Carrier System Including 40 in. Wheel/Tire Combination
• Vibration Tested To Hybrid SAE/MIL-Spec
• Maintain One Handed Entry To Your Cargo Area
• Compatible with All Aftermarket and OE Rear Bumpers
• Solid Aluminum Hinge Casting/Heavy Duty Steel Wheel Mount

See All

• 100 Percent Made In Texas USA

See All

• Hammer Black Powder Coat Finish
• Hold A 330 in. To 40 in. Tire And 14 in. Actual Width
• Universal Design Fits Most Truck Beds

See All

• Tire Carrier

See All

• Works With Jk-2965 Bumper
• Steel Tube Construction
• HD Dual Bearing Pivot Assembly
• Single Action Opening And Closing With The Tailgat
• Does Not Accommodate Factory Third Brake Light
• Tire Capacity 40 in.

See All

• Tire/Can Swing Arm Carrier
• Attaches To Tacoma Rear Bumper TC 2961
• Carries Up To 35 in. Tall Tire
• Bolt On No Drill Installation
• Dual Process Black Powder Coat Finish
• Takes The Spare Out Of The Bed Freeing Up Space
• Exclusive Design
• Retain Shackle Plate For D-Rings

See All

• Direct Fit
• Black
• Features A Billet Handle With A Cam Lock System
• Adjustable Tire Mount To Hold A 31-40 in. Tire
• Safety Catch To Hold Swing Away Open
• Tire Carrier Only; Bumper Must Be Purchased Separately Part Number 76653
• Mounting Hardware Included

See All

• Textured Black
• Carry Up To a 35 in. Tire
• Modular Design
• 5 x 4.5 Bolt Pattern
• Bolt-on

See All